Define which functions your G3 cutter has to perform and configure your modular Zünd tooling accordingly.

The setup of of knife-cutting, routing, and creasing tools occurs fully automatically. The ITI Initialization System makes the process quick and precise. 

Energy-efficient vacuum turbines ensure reliable material hold-down during the cutting process. The vacuum area is divided into zones, which can be switched on and off individually across the width of the machine. 

On a G3 cutting system, you can process materials up to a thickness of 110 mm/4.3 in. Depending on your requirements, the G3 can be configured with a beam height of 60 or 120 mm/1, 2 or 4 in. This means more flexibility and versatility in your production workflow.

Configure the D3 according to your specific needs, with cutter extensions and/or material-handling solutions. Just like the cutter, all these options were designed with an eye towards ergonomics. The cutter is easily accessible from all sides, which ensures an efficient production workflow.

Automate picking and sorting of cut parts with a collaborative robot. This enhances the level of automation of your cutting solution and increases productivity. The collaborative robot requires no guards or protective devices.

The automatic router bit/tool changer ARC dramatically reduces set-up times and simplifies tool handling. The magazine can accommodate up to eight different cutting, polishing, or engraving bits. The bits needed for processing are automatically removed, clamped, initialized, and cleaned after each use. The ITI initialization system checks the zero point after each tool change, ensuring perfectly consistent routing depths.